Week 6 Update (10/30 - 11/3)

The week's progress focused on starting to run the simulation on the desktop. Having gotten the existing files connected to the GitHub repository we were able to edit some of the dimensions to fit sizes we found online as a placeholder until the other team gave us the final sizes. All was working well, however once we moved to the desktop and input the commands to start up the simulation process we ran into errors not yet seen and spent the rest of the time trying to fix them. Eventually the issues were fixed and we were able to run the simulation for the first time only to realize the dimensions were in the wrong order and we had to fix them. Other tasks for the week include continuing the playlist and likely making a new repository as the working files aren't linked to GitHub.

The total time spent working this week was 18 hours.

Below are this weeks images:



Fig. 1 Directory Issues


Fig. 2 Commands to start simulation

Fig. 3 Simulation model with wrong dimensions



Fig. 4 Simulation model with correct dimensions



Fig. 5 Code for dimensions


Comments

Post a Comment

Popular posts from this blog

Week 9 Update (11/27 - 12/1)

Image
This week's progress centered around troubleshooting issues and then starting to alter our existing attempts at Ackermann Steering to work without any additional axles or parts to the simulation. Progress this week could have been minimal as going to the desktop on Wednesday led to the discovery that the Wifi Dongle attached to the monitor was no longer working. After much troubleshooting, we ultimately discovered that an unknown party unplugged the Wifi Dongle we were using and replaced it with a broken one; likely thinking that the broken one was a usb to connect a wireless keyboard and mouse. Solving the issue allowed us to begin reworking the current Ackermann model we created (which accidentally mmade the little robot into a helicopter). We aim to continue development on the reworked Ackermann model -- and hopefully have it done over the break -- so that the next semester can focus on the next phase of the project. The total hours logged for this week: 19 hours. Below are imag
Read more

Week 7 Update (2/19-2/23)

Image
This week showed progress in the development of our existing Move cpp node, and the creation of our new MoveWithLidar.xml behavior tree. We did a bit of restructuring to organize all functionality in our node, and logic in our behavior tree, which is proving much more helpful and efficient. We now have logic implemented in place of a basic loop with repeating hard-coded movement commands. Initially, we used a "go until you see a wall, stop, reverse until you see a wall, repeat" logic tree to test out Lidar scope and limitations. Through many trials, we learned a lot about the 360 scope of the lidar, as well as some errors in the structure of our code (ie. mixing logic between our node and bt). We narrowed the scope of the Lidar to make decisions only on input from an 11-1 o'clock range, so a side parallel wall will not trigger as an obstacle.  Additionally, this Monday we also received access to the actual Lidar sensor, and will being testing and implementation during Wee
Read more

Week 8 Update (11/13 - 11/17)

Image
This week's progress centered around updating our current simulation model to fit the physical models Ackermann Steering method. Progress this week was not major as many attempts to reconfigure the front wheels for more accurate steering were made, with advancements appearing near the end. We are continuing the development of the simulations Ackermann Steering and from there will begin programming a set path for the robot to move, additionally, the controller for the simulation may have to be updated to work with the new steering. The total hours logged for this week: 20 hours. Below are images and videos documenting our progress: Fig 1. Front Axle Testing Fig 2. Applying forces to the robot Fig 3. More forces
Read more